Hughes Polymer Additives Corp. has appointed CheMarCo, Inc. to represent them in the greater Southeast. Hughes Polymer Additives Corp. is dedicated to bringing the best experience possible in terms of processing and using chemical blowing agents, sometimes referred to as cfa’s or foaming agents. With over 20 years experience in the manufacture and use of these products, they can offer advice as to the selection and processing of chemical blowing agents in a wide range of applications and polymers.
For additional information on Hughes Polymer Additives, please visit their website at hpa4additives.com
Mace Polymers & Additives has appointed CheMarCo as their Southeast distributor for their polyurethane dispersions. Mace provides both waterborne and solventborne 1K polyurethane dispersions for a variety of markets including coatings, adhesives, and textiles. Additional information can be found at www.maceco.com
A&C Catalyst has appointed CheMarCo, Inc. to distribute their products in the Southeast. A&C Catalysts is a leading manufacturer and supplier of epoxy resins and curing agents. Our products are distinctive for their exceptional flexibility, toughness and long storage life. For superior adhesion, long pot life, greater reactivity at lower temperatures, and easy dispersion, look no further than A&C Catalysts' toughened epoxies, latent curing agents and accelerators. Our catalogue of products is the most diverse and complete in the industry. Not only do we represent Ajinomoto Co., a leading manufacturer of specialty epoxy curing agents and latent curing agents, our own cutting edge proprietary formulas enhance our ability to meet your specific needs.
OMNOVA Solutions has appointed CheMarCo, Inc. to distribute their products in the Southeast. OMNOVA is a leading innovator of emulsion polymers and specialty chemicals, which are used as binders, coatings, adhesives, and additives in a variety of applications.
For additional information on OMNOVA, please visit their website at www.omnova.com
CheMarCo is pleased to announce that Yvette Abadie Box has joined our team effective December 1, as Technical Sales Representative covering Georgia and Eastern, TN. Yvette has a BS in Polymer Science from the University of Southern Mississippi, and has worked as an Associate Chemist at Coronado Paint and most recently at Benjamin Moore. She is the past chairman of the SSCT Atlanta section, and continues to serve on the SSCT board of directors.
CheMarCo is pleased to announce that Len Scruggs has joined our team effective March 1, 2013 as Account Manager covering SC and Southern/Eastern NC. Len has a BS degree from Southern Wesleyan University and brings over 20 years of experience selling chemical products for distribution companies including Tri-State Chemical/Prillaman and Whitaker Chemical. Len will be located in Spartanburg, SC.
VCAS white pozzolans are derived from a post-industrial stream of by product reinforcement fiberglass made in a glass furnace. It is ground into a white powder finer than 325 mesh. VCAS can replace 15-50% of cement powders used in concrete that adds sustainability to architectural precast products. In earning LEED™ points, VCAS pozzolans can contribute by qualifying as recycled content and sourcing within 500 miles.
CheMarCo has appointed Jana Sykes as the Account Manager for the Alabama, Mississippi, and Tennessee territory. Jana has been involved in the chemical industry for 20 years, 15 years as an outside sales representative for companies such as Albright & Wilson Americas, Pilot Chemical, PQ Corporation and, most recently, Walsh and Associates.